BACK TO TOP
APPLICATION:
• Ideal for high output, high quality two-way and multiple way systems, line array systems
180FCDP
SPECS PDF
DRAWING PDF
SPECS PDF
DRAWING PDF
<< BACK
FERRITE COMPRESSION DRIVER
Ordering code: 180FCDP-330
CONT. POWER
SENS.
Fs
Freq. Range
VC Dia.
IN-OUT WOUND
VC Wire
Dome
Surround
Magnet
Type
110 WATTS
110.5 dB
1,000 Hz
800-
18,000 Hz
44mm
OUTSIDE
CCAW EW
Polyimide
Polyimide
FERRITE
The 180FCDP compression driver is a very high-performance, high-frequency device ideal for professional loud- speaker systems. The driver’s polyimide dome assembly is carefully attached to based magnetic circuit provides a robust, high force BL field, providing precision control of the Polyimide diaphragm assembly.
Diaphragm Assembly
The driver sports a 44mm polyimide diaphragm formed as a single piece with polyimide suspension. The suspension consists of FEM optimized resonance control to improve the diaphragm behavior at low frequencies and lower the THD. The voice coil to dome joint benefits from our proprietary dome treatment technology. The joint is stronger and more reliable than other products on the market. As the positive results, the power handling has been significantly increased.
The acoustic output exits through a circumferential phase plug and a 1.0-inch throat aperture. Nominal sensitivity is 110.5 dB 1watt / 1 meter.
REDCATT uses state of the art adhesives in all assembly steps. Our voice coil to dome bonding is a unique process, developed to greatly improve the power handling capabilities.
REDCATT unique and precise adhesives dispensing, combined with our in- house developed dome treatments are further improving the long term reliability of this product.
GENERAL SPECIFICATIONS:
Exit Throat Diameter
25.4 mm (1.0 in.)
Rated Impedance
8 ohm (or 16 ohm)
Power Handling
AES Power
55 watts
PROGRAM Power
110 watts
PEAK Power
220 watts
Sensitivity
110.5 dB
Frequency Range
800 Hz - 18,000 Hz
Min. Recommended X-OVER Freq.
1500 Hz
Min. Impedance
6.5 Ohm @ 25°C
Voice Coil Diameter
44 mm (1.75 in.)
Voice Coil Wire
CCAW Edge Wound
Magnet Type
ferrite
Flux Density
1.85 T
T/S Parameters:
Fs
1000 Hz
Re
7.23 Ohm
Le (mH @ 1kHz)
-- --
Mechanical Parameters:
Overall Diameter
70.6 mm (2.8 in.)
No. Of Mounting Holes
3x M5 or 2x M5
Bolt Circle Diameter
57 mm
Total Depth
68 mm
Flange and gasket thickness
-- --
Packaging info:
Net Weight
2.1 kg (4.6 lbs.)
Shipping Weight
-- variety of packaging --
Packaging Dimensions
-- variety of packaging --