10-Inch Professional Woofers & Mid-Woofers
Ten-inch drivers fill the space between compact two-way tops, stage monitors and mid-format line-array elements. REDCATT offers 8 10-inch woofers and mid-woofers with AES ratings from 150 W to 400 W and sensitivity up to 97.5 dB, in neodymium (4) and ferrite (4) designs.
- Models
- 8
- Sizes
- 10"
- AES power
- 150 – 400 W
- Motor
- Neo & ferrite
REDCATT 10-inch woofers
Filter the full catalogThe models balance bandwidth and output: light cones and strong motors for line arrays, more excursion for compact full-range cabinets. Every model is published with its full Thiele/Small set, frequency-response plot, datasheet, 2D drawing and STEP model.
101FHW
101NPM
10FHW
10FIND
10INOF
10NPM-1
10NPM-2
Twiggy10
10-inch specifications at a glance
Key figures for every model in this category. AES power is the two-hour AES2-1984 rating; programme power is twice and peak four times that figure. Complete Thiele/Small data, drawings and CAD are on each product page.
| Model | Size | Magnet | Impedance | AES power | Sensitivity | Fs | Xmax | Voice coil | Diaphragm / cone | Weight |
|---|---|---|---|---|---|---|---|---|---|---|
|
101FHW
DR-10-006-8R-B2-C0001
|
10" | Ferrite | 8 Ω | 200 W | 87 dB | 25 Hz | 12.15 mm | 50.8 mm | Paper GF | 6 kg |
|
101NPM
DR-10-007-8R-B2-C0001
|
10" | Neodymium | 8 Ω | 150 W | 94.6 dB | 53 Hz | 3.25 mm | 50.8 mm | Paper CF | 1.97 kg |
|
10FHW
DR-10-009-8R-B2-C0001
|
10" | Ferrite | 8 Ω | 200 W | 86 dB | 24 Hz | 12.15 mm | 50.8 mm | Aluminum | 6 kg |
|
10FIND
DR-10-012-8R-B2-C0001
|
10" | Ferrite | 8 Ω | 250 W | 95.8 dB | 66 Hz | 2.75 mm | 63.5 mm | Paper GF | 4.55 kg |
|
10INOF
DR-10-005-8R-B2-C0001
|
10" | Ferrite | 8 Ω | 250 W | 95 dB | 56.2 Hz | 4.05 mm | 63.5 mm | Paper CF | 6 kg |
|
10NPM-1
DR-10-017-8R-B2-C0001
|
10" | Neodymium | 8 Ω | 400 W | 97.5 dB | 64 Hz | 4.05 mm | 76.2 mm | Paper CF | 3.8 kg |
|
10NPM-2
DR-10-018-8R-B2-C0001
|
10" | Neodymium | 8 Ω | 200 W | 95.1 dB | 58 Hz | 6.35 mm | 76.2 mm | Paper CF | 3.5 kg |
|
Twiggy10
DR-10-025-4R-B2-C0001
|
10" | Neodymium | 4 Ω | 150 W | 87 dB | 40.7 Hz | 10.06 mm | 50.8 mm | GF Honey Comb | – |
How to choose 10-inch woofers
Array or cabinet
Line-array elements want high sensitivity, a shallow frame and controlled excursion; compact tops and monitors want more Xmax for use without a subwoofer.
Crossover point
Ten-inch woofers typically cross between 1.5 and 2.5 kHz to a 1-inch exit compression driver; check the published response above 1.5 kHz.
Enclosure
Vented cabinets for 10-inch woofers typically fall between 20 and 45 litres depending on Vas and Qts; a simulated recommendation is on each product page.
Neodymium for portable products
Neodymium 10-inch drivers suit portable powered speakers and columns; ferrite suits installed and high-volume OEM designs.
Typical applications
- Compact two-way PA tops
- Stage monitors
- Mid-format line-array elements
- Portable powered loudspeakers
- Installed sound and OEM programmes
Engineering data for every model
Full Thiele/Small parameters, frequency-response and impedance plots, datasheet PDF, 2D drawing and 3D STEP model on each product page, and the same data as JSON from the product API.
Independently tested 10-inch woofers
1 of the 8 drivers on this page have been measured or reviewed by independent publications. Metadata and links only; REDCATT does not publish ratings it did not earn. See all coverage on the reviews page.
Custom 10-inch woofers for OEM and ODM programmes
Every driver on this page can be adapted for an OEM programme at REDCATT's own factory in Dongguan: impedance, voice coil, cone or diaphragm, surround, motor and frame changes, or a new design built to a target specification. Standard catalog drivers have a minimum order quantity of 1 piece; custom and OEM MOQs are flexible, starting at 100 pieces, with quantity-tiered pricing; production lead time is 45 calendar days.
Tooling and NRE apply to custom developments that need dedicated tools. The range is wide: simple tools can cost as little as a few tens of dollars, while complex injection tools can exceed $50,000. NRE charges are refunded against placed production orders.
Quality and warranty
- - ISO 9001:2015 and IATF 16949:2016 certified quality system.
- - Every unit measured end-of-line; see the production consistency report.
- - Three-year limited warranty.
10-inch questions
How many 10-inch drivers does REDCATT make?
REDCATT lists 8 10-inch woofers and mid-woofers from 150 W to 400 W AES, in neodymium and ferrite versions, all on this page.
Which 10-inch driver suits a line array?
Favour high sensitivity and a shallow frame; depth and outer diameter are on each product page and in the STEP model.
Can a 10-inch woofer work without a subwoofer?
Yes for compact tops and monitors, particularly the higher-Xmax models; the product page enclosure recommendation shows the achievable low-frequency extension.
Are custom 10-inch drivers available?
Yes, through the OEM/ODM process with an MOQ that is flexible, starting at 100 pieces, with quantity-tiered pricing.
More commercial and technical answers on the FAQ page.
Need help shortlisting 10-inch woofers?
Send the target specification or the cabinet and our engineers will propose a driver, with samples and measurement data.